Seemed awfully easy... not sure why the baby powder or hair spray would make any difference... but I decided to give it a shot!
Step 1: Draw on design (my husband is in the Navy so I thought an anchor would be appropriate) -
Step 2: Cover in baby powder -
Step 3: Spray on hairspray and that's it, right?... right?... well, not exactly. There should be fine print in that original photo that states:
"NOTE: If you spray on the hairspray too close (about 12" from site), the ink will smear and you'll have to start all over." I even made sure to let the ink dry for about 20 minutes before spraying, too! Arg me matey...
This time, I decided to let the baby powder sit for a good 15 minutes before adding the hairspray, which I sprayed 24" away from the site, so as not to smear again.
So here's how it looked after 1 hour:
And here's how it looked after 24 hours:
| ...sorry I'm so blindingly white |
So yeah, that whole "last about a month" thing? Not true at all. I had it on my hip and didn't even wash the site the entire 24 hours, it just naturally vanished because baby powder and hairspray do nothing!
1. A Sharpie
2. A design printed on paper
3. A small book (I used a bunch of Post-Its)
4. A pair of nylons to draw on
Start by deciding where you want your design on your leg, and then put the paper design and book (or Post-Its) inside the nylon leg.
Trace the design with your Sharpie onto the nylons.
Once you're done, remove the design and book/Post-Its, put on the nylons and ta-da! It looks like you have a tattoo!
TOTAL COSTS: Free!
Old nylons, Sharpie, baby powder (useless), and hairspray (useless) already on hand
TOTAL AMOUNT OF TIME: Depends on design
Tracing your design might take 5 minutes or 20 minutes, depending on how detailed it is
EASY-PEASY SCALE (1 super easy - 5 very difficult): 1 out of 5
Tracing a design is a piece 'o cake! And you could use different color Sharpies to make your design as colorful as you like!
